Atmospheric remote sensing and radiopropagation: from numerical modeling to spaceborne and terrestrial applications

The remote sensing of electromagnetic wave properties is probably the most viable and fascinating way to observe and study physical media, comprising our planet and its atmosphere, at the same time ensuring a proper continuity in the observations. Applications are manifold and the scientific community has been importantly studying and investing on new technologies, which would let us widen our knowledge of what surrounds us. This thesis aims at showing some novel techniques and corresponding applications in the field of the atmospheric remote sensing and radio-propagation, at both microwave and optical wavelengths. The novel Sun-tracking microwave radiometry technique is shown. The antenna noise temperature of a ground-based microwave radiometer is measured by alternately pointing toward-the-Sun and off-the-Sun while tracking it along its diurnal ecliptic. During clear sky the brightness temperature of the Sun disk emission at K and Ka frequency bands and in the under-explored millimeter-wave V and W bands can be estimated by adopting different techniques. Parametric prediction models for retrieving all-weather atmospheric extinction from ground-based microwave radiometers are tested and their accuracy evaluated. Moreover, a characterization of suspended clouds in terms of atmospheric path attenuation is presented, by exploiting a stochastic approach used to model the time evolution of the cloud contribution. A model chain for the prediction of the tropospheric channel for the downlink of interplanetary missions operating above Ku band is proposed. On top of a detailed description of the approach, the chapter presents the validation results and examples of the model-chain online operation. Online operation has already been tested within a feasibility study applied to the BepiColombo mission to Mercury operated by the European Space Agency (ESA) and by exploiting the Hayabusa-2 mission Ka-band data by the Japan Aerospace Exploration Agency (JAXA), thanks to the ESA cross-support service. A preliminary (and successful) validation of the model-chain has been carried out by comparing the simulated signal-to-noise ratio with the one received from Hayabusa-2. At the next ITU World Radiocommunication Conference 2019, Agenda Item 1.13 will address the identification and the possible additional allocation of radio-frequency spectrum to serve the future development of systems supporting the fifth generation of cellular mobile communications (5G). The potential impact of International Mobile Telecommunications (IMT) deployments is shown in terms of received radio frequency interference by ESA’s telecommunication links. Received interference can derive from several radio-propagation mechanisms, which strongly depend on atmospheric conditions, radio frequency, link availability, distance and path topography; at any time a single mechanism, or more than one may be present. Results are shown in terms of required separation distances, i.e. the minimum distance between the earth station and the IMT station ensuring that the protection criteria for the earth station are met

Nanomechanical and topographical imaging of living cells by Atomic Force Microscopy with colloidal probes

Atomic Force Microscopy (AFM) has a great potential as a tool to characterize mechanical and morphological properties of living cells; these properties have been shown to correlate with cells' fate and patho-physiological state in view of the development of novel early-diagnostic strategies. Although several reports have described experimental and technical approaches for the characterization of cell elasticity by means of AFM, a robust and commonly accepted methodology is still lacking. Here we show that micrometric spherical probes (also known as colloidal probes) are well suited for performing a combined topographic and mechanical analysis of living cells, with spatial resolution suitable for a complete and accurate mapping of cell morphological and elastic properties, and superior reliability and accuracy in the mechanical measurements with respect to conventional and widely used sharp AFM tips. We address a number of issues concerning the nanomechanical analysis, including the applicability of contact mechanical models and the impact of a constrained contact geometry on the measured elastic modulus (the finite-thickness effect). We have tested our protocol by imaging living PC12 and MDA-MB-231 cells, in order to demonstrate the importance of the correction of the finite-thickness effect and the change in cell elasticity induced by the action of a cytoskeleton-targeting drug.Comment: 51 pages, 12 figures, 3 table

Energy recovery of the biomass from livestock farms in italy: The case of Modena province

The overall energy conversion efficiency of the waste-to-energy technologies is strongly affected by the distance of the biomass supply and the rate available during the year. Therefore, a simulation tool for the evaluation of the main outputs of a power plant for the wastes exploitation is a useful instrument for investigating the best trade-off between the plant size and the biomass supply. Nevertheless, it usually involves a large number of data and an extensive training and expertise. This paper focuses on the development of a numerical tool for the comparison of different waste-to-energy technologies and thus supporting the selection of the best exploitation strategy based on the data usually accessible to administrations. The numerical approach employs validated numerical models for the considered biomass exploitation technologies and its capabilities are demonstrated by simulating a reference case: the energy recovery from manure of different livestock farms in the province of Modena (Italy). The electric and thermal power production from the manure available in the considered territory is estimated and the produced electric energy is balanced with the energy requirements of the local animal farms. The remaining amount of wastes that has to be disposed is also calculated and compared with the initial input to the systems. Finally, different strategies for distributed and centralized exploitation of the manure are investigated and the related plant size and production of electric and thermal energy are evaluated. The proposed approach and the developed numerical tool prove to be useful instruments for decision makers and can help the efficient exploitation of the biomasses available in a region

An Innovative Approach to Kinematic Analysis of Multibody Hydraulic Actuation Systems

The paper focuses on the development of an innovative methodology for the direct measurement of the main kinematic variables in multi-body hydraulic actuation systems. The analysis investigates how the motion capture technique has been applied to the experimental determination of position, velocity and acceleration of hydraulically controlled actuation systems for off-highway machineries. A number of earth-moving machines has been taken into account, in particular a mini-excavator articulated harm has been equipped with both a standard mechanical system for position and acceleration measurement (including different accelerometers, linear and angular transducers), and a set of IR markers for motion capture application. First, the hydraulically controlled boom-arm-bucket system has been operated using a control routine reproducing a reference operating condition, in order to define the accuracy of the motion capture system in detecting the kinematic quantities\u2019 variations. At the same time, the hydraulic variables have been also acquired to monitor the behavior during the machine working routine. Thus, the results obtained by the different experimental techniques have been compared, in order to state the reliability of the motion capture technique to predict the fast dynamics of pressure variations through the accurate measurement of mechanical devices\u2019 oscillation. Finally, the paper reports the main results obtained using the data from the motion capture characterization of the dynamic performance of the mini-excavator, with particular attention devoted to the dynamic analysis through lumped and distributed parameter numerical co-simulation

Multidimensional Design of Hydraulic Components and Systems

In this chapter, the above mentioned critical aspects in the application of multidimensional numerical analysis for the design of mechanical devices and components for hydraulic systems are addressed. The objective of the chapter is to provide a roadmap for the multidimensional numerical analysis of the hydraulic components to be used effectively in the design process. In particular, two examples of hydraulic systems are accounted for in the application of the CFD analysis: a proportional control valve and a fuel accumulator for multi-fuel injection systems. These test cases have been selected due to their representativeness in the field of hydraulic applications and to the complexity and variety ofthe physical phenomena involved

Synthesis, Characterization, and Modeling of Naphthyl-Terminated sp Carbon Chains: Dinaphthylpolyynes

We report a combined study on the synthesis, spectroscopic characterization and theoretical modelling of a series of {\alpha},{\omega}-dinaphthylpolyynes. We synthesized this family of naphtyl-terminated sp carbon chains by reacting diiodoacetylene and 1-ethynylnaphthalene under the Cadiot-Chodkiewicz reaction conditions. By means of liquid chromatography (HPLC), we separated the products and recorded their electronic absorption spectra, which enabled us to identify the complete series of dinaphthylpolyynes Ar-C2n-Ar (with Ar = naphthyl group and n = number of acetilenic units) with n ranging from 2 to 6. The longest wavelength transition (LWT) in the electronic spectra of the dinaphthylpolyynes red shifts linearly with n away from the LWT of the bare termination. This result is also supported by DFT-LDA simulations. Finally, we probed the stability of the dinaphthylpolyynes in a solid-state precipitate by Fourier-transform infrared spectroscopy and by differential scanning calorimetry (DSC).Comment: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in [J. Phys. Chem. B], copyright \c{opyright} American Chemical Society after peer review. To access the final edited and published work see http://pubs.acs.org/doi/abs/10.1021%2Fjp104863

miRNAs as Influencers of Cell-Cell Communication in Tumor Microenvironment

microRNAs (miRNAs) are small noncoding RNAs that regulate gene expression at the posttranscriptional level, inducing the degradation of the target mRNA or translational repression. MiRNAs are involved in the control of a multiplicity of biological processes, and their absence or altered expression has been associated with a variety of human diseases, including cancer. Recently, extracellular miRNAs (ECmiRNAs) have been described as mediators of intercellular communication in multiple contexts, including tumor microenvironment. Cancer cells cooperate with stromal cells and elements of the extracellular matrix (ECM) to establish a comfortable niche to grow, to evade the immune system, and to expand. Within the tumor microenvironment, cells release ECmiRNAs and other factors in order to influence and hijack the physiological processes of surrounding cells, fostering tumor progression. Here, we discuss the role of miRNAs in the pathogenesis of multicomplex diseases, such as Alzheimer's disease, obesity, and cancer, focusing on the contribution of both intracellular miRNAs, and of released ECmiRNAs in the establishment and development of cancer niche. We also review growing evidence suggesting the use of miRNAs as novel targets or potential tools for therapeutic applications

Dynamic Analysis of the Lubrication in a Wet Clutch of a Hydromechanical Variable Transmission

The paper investigates the oil flow through a multi plate clutch for a hydro-mechanical variable transmission under actual operating conditions. The analysis focuses on the numerical approach for the accurate prediction of the transient behavior of the lubrication in the gear region: the trade-off between prediction capabilities of the numerical model and computational effort is addressed. The numerical simulation includes the full 3D geometry of the clutch and the VOF multi-phase approach is used to calculate the oil distribution in the clutch region under different relative rotating velocities. Furthermore, the lubrication of the friction disks is calculated for different clutch actuation conditions, i.e. not-engaged and engaged positions. The influence of different geometrical features of the clutch lubricating circuit on the oil distribution is also determined. The results show the areas where poor lubrication occurs and extend the experiments where measurements are difficult to carry out. The simulation highlights the regions where high thermal stresses are observed during tests

Numerical analysis of an entire ceramic kiln under actual operating conditions for the energy efficiency improvement

The paper focuses on the analysis of an industrial ceramic kiln in order to improve the energy efficiency and thus the fuel consumption as well as the pollutant emissions. A lumped and distributed parameter model of the entire system is constructed to simulate the performance of the kiln under actual operating conditions. The model is able to predict accurately the temperature distribution along the different modules of the kiln and the operation of the many natural gas burners employed to provide the required thermal power. Furthermore, the temperature of the tiles is also simulated so that the quality of the final product can be addressed by the modelling. Numerical results are validated against experimental measurements carried out on a real ceramic kiln during regular production operations. The developed numerical model demonstrates to be an efficient tool for the investigation of different design solutions for the kiln’s components. In addition, a number of control strategies for the system working conditions can be simulated and compared in order to define the best trade off in terms of fuel consumption, emissions and product quality. In particular, the paper analyzes the effect of a new burner type characterized by internal heat recovery capability aimed at improving the energy efficiency of the ceramic kiln. The fuel saving and the relating reduction of carbon dioxide emissions resulted in the order of 10% when compared to the standard burner

Effects of axial torsion on sp carbon atomic nanowires

Ab-initio calculations within Density Functional Theory combined with experimental Raman spectra on cluster-beam deposited pure carbon films provide a consistent picture of sp-carbon chains stabilized by sp^3 or sp^2 terminations, the latter being sensitive to torsional strain. This unexplored effect promises many exciting applications since it allows one to modify the conductive states near the Fermi level and to switch on and off the on-chain pi-electron magnetism.Comment: in print in Phys Rev Let